User Contributed MET/CAL PROCEDURE ============================================================================= INSTRUMENT: Honeywell 1882 LGD:Differential Plug-In DATE: 25-Oct-95 AUTHOR: User Contributed REVISION: ADJUSTMENT THRESHOLD: 70% NUMBER OF TESTS: 33 NUMBER OF LINES: 240 CONFIGURATION: Fluke 5700A ============================================================================= STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON 1.001 ASK- R N P S M F W 1.002 ASK+ X 1.003 HEAD ÍÍ INITIAL CONDITIONS ÍÍ 1.004 DISP With the exception of the module to be tested, make sure 1.004 DISP all other modules in the mainframe are OFF. 1.005 DISP Set all the VAR controls full CW. 1.006 DISP On the mainframe set the GRIDLINE to OFF. 1.007 DISP Set UUT TRACE to ZERO. 1.008 DISP Adjust the UUT POS control to roughly center the trace. 1.009 DISP While switching between ZERO, NORM and REV, adjust 1.009 DISP the BAL control for minimum delfection. 1.010 HEAD {} 1.011 HEAD {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 1.012 HEAD {º Range Tests º} 1.013 HEAD {ÈÍÍÍÍÍÍÍÍÍÍÍÍͼ} 1.014 HEAD ÍÍ Range Tests ÍÍ 1.015 JMP 2.001 1.016 EVAL 2.001 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 2.001 DISP SENS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] .1 V/DIV 2.001 DISP TIMELINE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] OFF 2.001 DISP GRIDLINE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] CONT 2.001 DISP RECORD SPEED ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 1 in/sec 2.001 DISP MULTIPLIER ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 0.1 2.001 DISP TRACE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] NORM 2.002 DISP Connect the 5700 V/ê/A output to the UUT input. 2.003 DISP Open the paper housing to expose the CRT. 2.004 5700 0V S 2W 2.005 DISP Adjust the POS control on the UUT to line up the 2.005 DISP cursor with the left most grid marker. 2.006 5700 0.7V S 2W 2.007 DISP Adjust the TRIM control to position the UUT cursor 2.007 DISP on the 35th (from left) grid marker. (7 major divisions) 2.007 DISP 2.007 DISP It may be necessary to get a printout to make this 2.007 DISP adjustment. 2.008 HEAD {ÍÍ .2V/DIV ÍÍ} 2.009 JMP 3.001 2.010 EVAL 3.001 5700 0V S 2W 3.002 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 3.002 DISP SENS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] .2 V/DIV 3.003 DISP Adjust the POS control if necessary. 3.004 MESS Adjust the 5700 output so the UUT cursor is 3.004 MESS on the 35th grid marker. 3.005 5700 1.400V 0.5000% 2W #! Test Tol 0.014, Sys Tol 9.6e-006, TUR 1458.333 (>= 4.00). 4.001 HEAD {ÍÍ .5V/DIV ÍÍ} 4.002 JMP 5.001 4.003 EVAL 5.001 5700 0V S 2W 5.002 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 5.002 DISP SENS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] .5 V/DIV 5.003 DISP Adjust the POS control if necessary. 5.004 MESS Adjust the 5700 output so the UUT cursor is 5.004 MESS on the 35th grid marker. 5.005 5700 3.5000V 0.5000% 2W #! Test Tol 0.007, Sys Tol 5.4e-006, TUR 1296.296 (>= 4.00). 6.001 HEAD {ÍÍ 1V/DIV ÍÍ} 6.002 JMP 7.001 6.003 EVAL 7.001 5700 0V S 2W 7.002 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 7.002 DISP SENS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 1 V/DIV 7.003 DISP Adjust the POS control if necessary. 7.004 MESS Adjust the 5700 output so the UUT cursor is 7.004 MESS on the 35th grid marker. 7.005 5700 7.000V 0.5000% 2W 8.001 HEAD {ÍÍ 2V/DIV ÍÍ} 8.002 JMP 9.001 8.003 EVAL 9.001 5700 0V S 2W 9.002 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 9.002 DISP SENS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 2 V/DIV 9.003 DISP Adjust the POS control if necessary. 9.004 MESS Adjust the 5700 output so the UUT cursor is 9.004 MESS on the 35th grid marker. 9.005 5700 14.000V 0.5000% 2W 10.001 HEAD {ÍÍ 5V/DIV ÍÍ} 10.002 JMP 11.001 10.003 EVAL 11.001 5700 0V S 2W 11.002 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 11.002 DISP SENS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 5 V/DIV 11.003 DISP Adjust the POS control if necessary. 11.004 MESS Adjust the 5700 output so the UUT cursor is 11.004 MESS on the 35th grid marker. 11.005 5700 35.000V 0.5000% 2W 12.001 HEAD {ÍÍ 10V/DIV ÍÍ} 12.002 JMP 13.001 12.003 EVAL 13.001 5700 0V S 2W 13.002 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 13.002 DISP SENS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 10 V/DIV 13.003 DISP Adjust the POS control if necessary. 13.004 MESS Adjust the 5700 output so the UUT cursor is 13.004 MESS on the 35th grid marker. 13.005 5700 70.000V 0.5000% 2W 14.001 HEAD {ÍÍ 20V/DIV ÍÍ} 14.002 JMP 15.001 14.003 EVAL 15.001 5700 0V S 2W 15.002 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 15.002 DISP SENS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 20 V/DIV 15.003 DISP Adjust the POS control if necessary. 15.004 MESS Adjust the 5700 output so the UUT cursor is 15.004 MESS on the 35th grid marker. 15.005 5700 140.00V 0.5000% 2W 16.001 HEAD {ÍÍ 50V/DIV ÍÍ} 16.002 JMP 17.001 16.003 EVAL 17.001 5700 0V S 2W 17.002 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 17.002 DISP SENS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 50 V/DIV 17.003 DISP Adjust the POS control if necessary. 17.004 MESS Adjust the 5700 output so the UUT cursor is 17.004 MESS on the 20th grid marker. 17.005 5700 200.00V 0.8750% 2W 18.001 HEAD {ÍÍ 100V/DIV ÍÍ} 18.002 JMP 19.001 18.003 EVAL 19.001 5700 0V S 2W 19.002 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 19.002 DISP SENS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 100 V/DIV 19.003 DISP Adjust the POS control if necessary. 19.004 MESS Adjust the 5700 output so the UUT cursor is 19.004 MESS on the 15th grid marker. 19.005 5700 300.00V 1.1667% 2W #! Test Tol 0.0035, Sys Tol 3.3e-006, TUR 1060.606 (>= 4.00). 20.001 HEAD {} 20.002 HEAD {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 20.003 HEAD {º Linearity Test º} 20.004 HEAD {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ} 20.005 HEAD {ÍÍ .1V/DIV ÍÍ} 20.006 HEAD ÍÍ Linearity Test ÍÍ 20.007 JMP 21.001 20.008 EVAL 21.001 5700 0V S 2W 21.002 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 21.002 DISP SENS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] .1 V/DIV 21.003 DISP Adjust the POS control if necessary. 21.004 MESS Adjust the 5700 output so the UUT cursor is 21.004 MESS on the 5th grid marker. 21.005 5700 0.1000V 0.0070U 2W #! Test Tol 0.014, Sys Tol 1.9e-005, TUR 736.842 (>= 4.00). 22.001 MESS Adjust the 5700 output so the UUT cursor is 22.001 MESS on the 10th grid marker. 22.002 5700 0.2000V 0.0070U 2W #! Test Tol 0.014, Sys Tol 1.65e-005, TUR 848.485 (>= 4.00). 23.001 MESS Adjust the 5700 output so the UUT cursor is 23.001 MESS on the 15th grid marker. 23.002 5700 0.3000V 0.0070U 2W #! Test Tol 0.014, Sys Tol 1.32e-005, TUR 1060.606 (>= 4.00). 24.001 MESS Adjust the 5700 output so the UUT cursor is 24.001 MESS on the 20th grid marker. 24.002 5700 0.4000V 0.0070U 2W #! Test Tol 0.014, Sys Tol 1.02e-005, TUR 1372.549 (>= 4.00). 25.001 MESS Adjust the 5700 output so the UUT cursor is 25.001 MESS on the 25th grid marker. 25.002 5700 0.5000V 0.0070U 2W #! Test Tol 0.014, Sys Tol 7.2e-006, TUR 1944.444 (>= 4.00). 26.001 MESS Adjust the 5700 output so the UUT cursor is 26.001 MESS on the 30th grid marker. 26.002 5700 0.6000V 0.0070U 2W #! Test Tol 0.014, Sys Tol 4.2e-006, TUR 3333.333 (>= 4.00). 27.001 MESS 27.002 JMP 33.001 27.003 HEAD {} 27.004 HEAD {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 27.005 HEAD {º Frequency Response º} 27.006 HEAD {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ} 27.007 HEAD {ÍÍ Referenced to 400Hz ÍÍ} 27.008 HEAD ÍÍ Frequency Response ÍÍ 27.009 JMP 28.001 27.010 EVAL 28.001 DISP Set the UUT TRACE switch to ZERO. 28.001 DISP Adjust the UUT cursor to the middle grid marker. 28.002 DISP Set the UUT TRACE switch to NORM. 28.003 MESS Using the UUT POS and the 5700A AMPTD MODIFY 28.003 MESS controls, adjust the display for a deflection of 28.003 MESS 34 gridlines. 28.004 5700 0.240V 400H N 2W 28.005 MEME >1 28.006 MESS Adjust the 5700A amplitude output for a deflection of 28.006 MESS 34 gridlines. 28.007 5700 0.240V 10H N 2W 28.008 MEME 28.009 MEME <1 28.010 MEMC V 3.000% 10H #! Test Tol 0.00625, Sys Tol 0.0007875, TUR 7.937 (>= 4.00). 29.001 MESS Adjust the 5700A amplitude output for a deflection of 29.001 MESS 34 gridlines. 29.002 5700 0.240V 100H N 2W 29.003 MEME 29.004 MEME <1 29.005 MEMC V 3.000% 100H #! Test Tol 0.00625, Sys Tol 0.00010075, TUR 62.035 (>= 4.00). 30.001 MESS Adjust the 5700A amplitude output for a deflection of 30.001 MESS 34 gridlines. 30.002 5700 0.240V 1kH N 2W 30.003 MEME 30.004 MEME <1 30.005 MEMC V 3.000% 1kH #! Test Tol 0.00625, Sys Tol 0.00010075, TUR 62.035 (>= 4.00). 31.001 MESS Adjust the 5700A amplitude output for a deflection of 31.001 MESS 34 gridlines. 31.002 5700 0.240V 3kH N 2W 31.003 MEME 31.004 MEME <1 31.005 MEMC V 5.000% 3kH #! Test Tol 0.01625, Sys Tol 0.00010075, TUR 161.290 (>= 4.00). 32.001 MESS Adjust the 5700A amplitude output for a deflection of 32.001 MESS 34 gridlines. 32.002 5700 0.240V 5kH N 2W 32.003 MEME 32.004 MEME <1 32.005 MEMC V 12.000% 5kH #! Test Tol 0.0375, Sys Tol 0.00010075, TUR 372.208 (>= 4.00). 33.001 HEAD {} 33.002 DISP {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 33.002 DISP {º THIS COMPLETES THE VERIFICATION º} 33.002 DISP {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ} 33.003 END #! T.U.R.s less than 4.00: 0 #! T.U.R.s estimated using RANGE value: 0 #! T.U.R.s not calculated (ASK- U): 0 #! T.U.R.s not computable at compile time: 0 #! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.